Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
A. Vacuum orifice
B. Strap hook
C. On/off button
D. Handle
E. Unlocking device
F. Long tube for handle adjustment
G. Connection tube
H. Filter
I. Dust compartment lid
J. Strap
K. Rug/carpet brush
L. 3-part handle
M. Narrow suction brush
N. Oval brush
O. Electrical cable
P. Short tube
Q. Flat roller brush
R. Special "reverse" lid
S. 4 "reverse" accessories
Assembly
Warning: always unplug the vacuum cleaner before opening the dust compartment (A).
Warning: whilst operating the hand-held vacuum cleaner, use the dust compartment filter (H).
1.
To open the dust compartment (A), press the button (E) and remove the dust compartment (A).
Make sure that the dust compartment filter is in position, then attach the dust compartment (A) to the hand-
held vacuum cleaner.
2.
To attach the oval brush (N) or the narrow suction brush (M) on to the vacuum cleaner, push the brush into
the opening (1) as shown in the illustration below.
3.
To use the short flexible tube (P), push the end of the tube into the suction hole (A), then attach the desired
brush (K, M or N) at the other end of the flexible tube as in the illustration below.
Voltage: 230V 50 Hz
Capacity: max. 800W
Werbung
Inhaltsverzeichnis
