Diving Scooter Operation; Start And Speed Regulation - Conrad Bladefish BF5000 Bedienungsanleitung

9. Diving scooter operation

• In order to start the diving scooter, the start plug (10) must be inserted into the start and charging socket
(9).
• When doing this, make sure that the start plug (10) is inserted correctly, as shown in the picture.
Correct position for
start plug
• You will hear a slight click as the start plug (10) is engaged in the start and charging socket (9).
10. Start and speed regulation of the diving scooter
• Press the two operation controls on the right (3) and left (4) at the same time to start the diving scooter.
• Releasing one of the controls (3 or 4) and pressing it again will raise the speed. Continue doing this
until you have reached the highest speed level. There are three different speed levels available on the
diving scooter.
• Once you have reached the highest speed level, releasing one of the controls (3 or 4) and pressing
it again will reduce the speed.
• Releasing one of the controls (3 or 4) for approx. one second will switch the diving scooter off.
• To restart it, the two operation controls on the right (3) and left (4) must be pressed again at the same
time.
Make sure that the diving scooter is not declared ready for
operation if the start plug is not inserted in the start and
charging socket.
23