Setting Up And Programming The Camera - Conrad 596113 Bedienungsanleitung

12. Setting up and programming the camera

When.you.first.turn.on.the.camera.in.operating.mode.CAM,.the.LC.display.shows.the.camera.status..
The.LC.display.can.show.the.following.
Camera operation mode
Number of burst photos
Image quality
If.no.key.is.pressed.for.a.period.of.30.seconds,.the.LC.display.switches.to.sleep.mode.and.shows.the.
current.recording.resolution..Then.the.camera.switches.to.a.1.minute.countdown.during.which.you.
can.leave.the.this.area..Afterward.the.camera.switches.to.passive.infrared.(PIR).or.time-lapse.mode,.
depending on the presets. Push one of the
shows.the.current.camera.status..A.description.of.the.settings.is.included.in.the.following.pages.
This.camera.allows.you.to.toggle.between.two.operating.modes..Make.sure.that.the.product.is.turned.
off before using the TEST OFF CAM PSET switch.
Camera operation mode CAM
This.mode.allows.you.to.define.the.settings..The.LC.display.shows.either.PIR.(motion.detector).or.TLS.
(time-lapse),.depending.on.the.presets.
Camera operation mode PSET
This.setting.bypasses.the.settings.you.have.made.and.uses.the.following.presets:.
PIR.mode./.Resolution:.3.MP./.Photo.burst:.3.images./.Idle.time:.30.seconds.(the.LC.display.shows.
T-O.(time.out)).
Passive.infrared.mode.(PIR)
Battery status
PIR.or.TLS.mode
Date and time
/ .keys.once.to.activate.the.display..The.LC.display.
Time-lapse./.PIR.mode
49