Inhaltsverzeichnis
Werbung
1. Oil filled fins
2. Handle
3. Thermostat control
4. Indicator light
5. Base
OPERATING YOUR OIL-FILLED HEATER
Place the heater on the floor at least 90cm away from the wall and any other objects such as furniture,
Curtains or plants.
(Make sure the power supply used corresponds to the one on the rating label)
With the thermostat control switch in the "O" position and the power setting switches in the "OFF"
Position; plug the heater into the main power supply.
1. Room temperature can be adjusted using the thermostat. Simply turn the thermostat knob
clockwise, to increase the heat, and anti-clockwise to decrease the temperature, until you reach
the desired temperature.
2. Switch the heater.
3. The power switch lights up when activated.
4. Turning the thermostat control clockwise will increase the "set" temperature.
5. Turning the thermostat anti-clockwise will decrease the "set" temperature.
6. Do not cover the heater at any time during operation. There is a risk of fire if the heater is covered.
7. Once you have finished using your heater. Turn the power switches off, and the thermostat control
switch to the "0"positions.,and unplug from the mains supply.
CLEANING YOUR OIL-FILLED HEATER
1. Always disconnect the heater from the mains supply before cleaning.
2. Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
3. DO NOT use waxes or polishes as these may react with the heater and cause discoloration.
STORING YOUR OIL-FILLED HEATER
1. Save the box for off season storage.
2. Clean the heater following the cleaning instructions above.
3. Remove the base assemblies.
4. Place the heater assemblies in the original box, and store in a cool and dry place.
5. If you choose to store your heater fully assembled be sure to cover it to protect it from dust.
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany
PARTS DESCRIPTION
OPERATION
7
Werbung
Inhaltsverzeichnis
