Direct Pvr Recording (Manual); Programmed Recording With Epg (Electronic Programme Guide) - AEG CTV 2601 LCD/DVB-T Bedienungsanleitung

The window on the right is displayed. Select between "FAT 32" and "Hi Speed" for-
matting.
• Press / to select the desired formatting mode.
• Press OK to confirm. A security prompt is displayed.
• Press to start formatting. The USB device is now formatted and the PVR files
are created.
NOTE: This can take several minutes according to disk capacity.
If you have selected "Hi Speed" formatting, a window for setting the time shift size appears.
• Press / to select the desired Time Shift Size (size between 512MB....All).
NOTE:
Selecting ALL for the time shift function uses the maximum disk capacity, and for further recordings is no capacity
left.
• Free Record Limit
Press the arrow button

9.2 Direct PVR Recording (Manual)

1. In DTV mode select the programme to be recorded.
2. Press the REC/REP button. The info bar is displayed.
The recording time is displayed at the bottom right. Below this you can see the remaining recording time in blue.
NOTE:
Press REC/REP again to hide the info bar. The REC button remains top left on screen.
3. Press the button to finish recording.
NOTE:
• Press the button to pause the current recording ( see "9.5 Time Shift Function" on page 61).
9.3 Programmed Recording with EPG (Electronic Pro-gramme Guide)
1. Press the EPG button to access the electronic programme guide.
2. Press INDEX and press / to select CHANNEL (1).
3. In CHANNEL (2) press / to select the channel.
4. Press / to select the desired programme.
5. Press the red button. The recorder window is displayed.
6. Press OK to confirm the entered times.
7. Programming is finished and the dates are shown in the Overview.
8. Press EXIT to close the window.
NOTE:
• During recording the info bar is displayed. Press REC/REP to hide the info bar. The REC button top left on screen
remains.
• Important: The device does not automatically turn off after the recording is finished.
Different Programme Modes
To change the recording mode of the programming via EPG, select the bottom line in the Timer window. Here, select
between the following modes:
Auto: The preset times of the station are saved.
Once: If necessary, you can change the preset start and end times.
Daily: The programme is recorded daily.
Weekly: The programme is recorded again on the same day of the week.
to select the recording time between 1 and 6 hours.
ENGLISH
61