Cleaning And Maintenance - IKEA LAGAN Bedienungsanleitung

ENGLISH
Cleaning and maintenance
WARNING:
- Never use steam cleaning equipment.
- Disconnect the appliance from the
power supply.
IMPORTANT: do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean immediately with a damp
cloth.
• Clean the surfaces with a damp cloth.
If it is very dirty, add a few drops of
washing up detergent to the water.
Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges
or metallic scrapers or scourers. Over time,
these can ruin the surface.
• Use detergents specifically designed for
cleaning the appliance and follow the
manufacturer instructions.
IMPORTANT: clean the filters at least
monthly to remove any oil or grease
residuals.
To clean the grease filter
The metal grease filter has an unlimited life
and must be washed once a month by hand
or dishwasher at low temperature and with
a short cycle.
With cleaning in a dishwasher the grease
filter may become dull; this does not effect
its filtering capacity.
Grease filter maintenance:
1. Disconnect the hood from the power
supply.
2. Open the extraction grille or remove the
self-supporting grease filter (in the latter
case, wash the filter immediately).
3. Remove the device securing the grease
filter.
4. Remove the dirty grease filter.
5. After changing or washing the grease
filter (depending on the model), refit
by proceeding in reverse order, making
sure it covers the entire extraction
surface.
Charcoal filter maintenance
(Recirculation hoods only).
Charcoal filter is neither lavable nor
regenerable.
Replace it every 4 months.
1. Disconnect the hood from the power
supply.
2. Open the extractor grille or remove the
self-supporting grease filter.
3. Fit the filter over the extraction motor
protection grille so that the slots on the
filter match the hooking pins located at
the sides of the motor protection grille.
4. Turn the charcoal filter clockwise to lock
it (bayonet fixing).
8