Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E. Media Status -
status of a disk. To display the media status
window, perform the following steps:
BR O W S
V IE W
0 4 /1 6 /9 7
P re s s D IS P la y K e y
D ISP
0 4 /1 6 /9 7
P o in t
Ve rsio n
U s e U p o r D o w n A rro w
K ey s to scro ll H ig h lig h t B a r
to M e d ia S ta tus a n d p re ss E N T E R .
E N T E R
0 4 /1 6 /9 7
10 4 025 M A
Figure 3-28 Display Media Status Flow Chart
1. Displaying Media Status - Press the DIS-
PLay Key and use the UP (↑) or DOWN (↓) Ar-
row Keys to highlight "Media Status". Press
ENTER and a window will be displayed (Figure
4-2) showing the total size of the disk, the
amount of free space available on the disk, the
write protected status, the status of the format,
and battery information for PCMCIA cards.
Total Size: 1,423 K
Free:
1,141 K
Write Prot: NO
Format:
OK
Battery:
N/A
Figure 3-29 Media Status Window
2. Removing Media Status Window - To re-
move the media status window, press the DIS-
PLay Key and use the UP (↑) or DOWN (↓) Ar-
row Keys to highlight "Media Status". Press
ENTER and the window will clear.
3.5.3 PROGram Menu -
Menu allows the user to program inputs and
associated parameters into the Recorder. Refer to
Chapter
4
of
this
programming details.
Siemens AG C79000-G7374-C211-01
SIREC D Manual
This function displays the
Pre s s M E N U K ey
JO G
M E N U
4 :5 9 :2 9
PR O G
F U N C
E X IT
4 :5 9:2 9
4:5 9 :2 9
EX IT
The Program
Manual
for
complete
3.5.4 FUNCtion Menu -
Function Menu, by pressing the FUNCtion Key,
allows you to perform the following functions:
•
Turn Record On/Off
•
Activate Points
•
Bypass Points
•
Reset Points
•
Select Chart Speed
•
Select Record Speed
•
Turn Alarm Checks ON or OFF
•
Select Scale Set one or two
•
Print Event Messages to the Alarm Window
or a File
The FUNCtion menu may be password protected
in which case you will be required to enter the
password before proceeding. Refer to Chapter 4,
Passcodes, for details of passcode programming.
The following paragraphs and flow charts detail
programming the FUNCtion Menu items:
A. Turning Record On or Off or Assign
a Trigger -
The Record On/Off allows the user to
stop or start recording to disk and to start recording
per a pre set- up trigger condition. The choices are
•
Record off
•
Record on
•
Trigger
To select the Record On/Off menu use the UP (↑)
or DOWN (↓) Arrow Keys to highlight "Record
On/Off" and then press ENTER. Follow the
instruction steps and flow charts to turn Record
ON, OFF, or to Trigger the Record Cycle:
Operation
Invoking the
3-15
Werbung
Kapitel
Inhaltsverzeichnis
