Setting The Mowing Times; Edge Mowing With A Manual Start - Kärcher RLM 4 Betriebsanleitung

Set entry point 1
8. or
entry point has been specified during the
teaching-in movement. If no entry point has
been specified here, the entry points are au-
tomatically specified.
Entry point x: XXm
9. or
last entry point has been reached.
Manually specifying entry points (01)
The first entry point (01/X0) is preset and is 1 m
to right of the charging station. Up to 3 other en-
try points (X1 to X3) can be programmed behind
this point. When specifying the entry points, heed
the following:
■
Do not set entry points too far from the
charging station or too close to one anoth-
er (02/f).
■
Only use as many entry points as necessary.
* Entry Point
1. or
* Point X1 at [020m]
2. or
Select one digit in sequence with
and respectively accept with
* Point X2 at [075m]
3. or
Select one digit in sequence with
and respectively accept with
4. If necessary, specify further entry points.
5. Return to the main menu with
7.5.3

Setting the mowing times

NOTE
There must be at least 30 min. between
programming the mowing times and the
mowing start. If not, the appliance only
starts at the next programmed mowing
time.
In the Weekly Program menu item, the days of
the week and time periods when the appliance
should mow are set. Adapt these settings to the
size of your garden if necessary. If unmown ar-
eas are still visible after approx. one week, in-
crease the mowing periods.
457462_a
if no 1.
if the
2. Make the settings for every day or the re-
or
.
or
.
.
3.
7.6
For a manual start, the setting can be made here
that the appliance begins with edge mowing.
Carrying out the edge mowing at the pro-
grammed mowing time periods: see chapter 7.5.3
"Setting the mowing times", page 53.
1.
2.
GB
* Weekly Program
or
■
* All Days [X]: The appli-
or
ance mows every day at the set times. If
All Days [ ] is shown, the appliance
only mows on the set days of the week.
■
* Monday [X]...* Sunday
or
[X]: The appliance mows for the set
time periods on the set day of the week.
If Monday [ ] is shown, for example,
the appliance does not mow on the re-
spective day.
■
Change
or
deactivate [ ] the respective day and
set the time periods, type of mowing and
the entry points.
spective day:
■
e.g. *[M] 07:00-10:00 [?]: Normal
mowing [M] from 7 am – 10 am with au-
tomatically changing entry point 0 – 3
[?].
■
e.g. *[R] 16:00-18:00 [1]: The ap-
pliance starts with edge mowing [R] at 4
pm and moves along the entire boundary
cable. The area mowing then begins at
entry point 1 [1]. At 6 pm or as soon as
the rechargeable battery is discharged,
the appliance moves back to the
charging station.
■
Change
or
lected setting.
■
Continue
or
changes setting and continue to the next
setting.
Save
or : Save all changed set-
tings of the menu item.

Edge mowing with a manual start

* Margin mowing
or
* at manual start
or
: Activate [X] or
: Change the se-
: Confirm the
53