Cleaning And Maintenance - Klarstein 10032029 Handbuch

CLEANING AND MAINTENANCE

Be sure to unplug this appliance and make it cool down completely before cleaning. To
protect against electrical shock, do not immerse cord, plug or body in water or liquid
and do not fill the bean hopper with water for cleaning. After each use, always make
sure plug is first removed from wall outlet.
1. Disassemble the bean hopper by following the operation mentioned above, and
then rinse the bean hopper, bean hopper lid, ground coffee container and ground
coffee container lid with water, and dry them thoroughly.
2. Lift the handle of grinding wheel and then rotate it anticlockwise to remove the
grinding wheel, after it, clean the residual coffee powder on the grinding wheel
and grinding blade with a brush and then pour the residual coffee powder out (see
Fig.2). To replace the grinding wheel back in position, firstly, put the grinding wheel
into the grinding chamber by making the groove on the grinding wheel align with
the tab on the grinding chamber, and then rotate the grinding wheel clockwise until
it is fixed well in position.
Hinweis
Bitte gehen Sie vorsichtig mit dem Mahlwerk um, da das Mahlwerk und die
Schneideklinge sehr scharf sind.
3. Reiben Sie den Gerätekorpus mit einem nassen Tuch ab und trocknen Sie es
anschließend vollständig.
4. Lagern Sie das Gerät in einer trockenen und kühlen Umgebung, während Sie das
Gerät nicht verwenden.
EN
17