Operation - Klarstein 10032029 Handbuch

OPERATION

Before the first time
1. Carefully unpack your coffee grinder and remove all packing materials.
2. To remove any dust that may have accumulated during packaging.
3. And then detach the bean hopper by following the operation as below: press
down the bean hopper release button and simultaneously turn the bean hopper
anticlockwise to remove the bean hopper from bean hopper holder for cleaning.
4. After it, rinse the bean hopper, bean hopper lid, ground coffee container lid and
ground coffee container with water and then dry thoroughly.
CAUTION: Never immerse the body in water for cleaning and do not fill the bean
hopper with water for cleaning.
Preparation
1. Place the coffee grinder on a flat surface.
2. Assemble the bean hopper to the bean hopper holder by following the operation
as below: Firstly, put the bean hopper into the bean hopper holder by making the
tab on the bean hopper align with the groove on the bean hopper holder and then
turn the bean hopper clockwise until it is tightly locked into the bean hopper holder
(see Fig.1). When disassemble, press down the bean hopper release button and
simultaneously turn the bean hopper anticlockwise to remove the bean hopper from
bean hopper holder
NOTE: The bean hopper is equipped with microswitch so that it must be assembled in
position before operate, or the appliance will not work.
3. Pour appropriate amount of coffee beans into the bean hopper, it must be noted the
quantity of coffee beans shall not exceed 360g.
NOTE: If run the appliance without coffee beans, the appliance will stop working after
running for about 5 minutes. And the appliance must rest for 30 minutes if it is operated
for 5 minutes continuously
4. Close the bean hopper lid.
5. Put the ground coffee container (with lid in position) on the ground coffee container
holder. Ensure that the opening of ground coffee container shall align with the
coffee powder outlet.
6. Turn the strength control dial to select your desired coffee strength. Turn it to the
right, the coffee strength will be increased while it will be decreased when turn the
strength control dial to the left.
7. The coffee-dispensing amount is determined by grinding time, therefore, you can
turn the click-wheel to select your desired grinding time by referring to " Table 1".
When select, the corresponding indicator of your selected grinding time will light at
100% brightness. If you do not want to adjust the grinding time, the appliance will
work under the default grinding time.
EN
15