Connecting The Wireless Camera; Connecting The Radio Receiver - Conrad 75 17 85 Bedienungsanleitung

• Select a suitable mounting location for the camera.
• There are mounting holes in the "Mounting Base" (11). Mark these holes (e.g. with a
pencil through the holes) on the wall.
• Drill the mounting holes.
• Attach the "mounting base" (11) to the wall with suitable mounting materials.
• Move the camera into the desired position.
Do not point the camera directly toward a source of bright sunlight
or toward strong or indirect illumination as this may lead to overex-
posure and a fuzzy picture.

5.2 Connecting the Wireless Camera

• Connect the low voltage plug of the supplied plug-in mains power supply with the "DC
IN 8V" (12) power connection on your wireless camera.
• Insert the plug-in power unit into a suitable mains socket.

5.3 Connecting the Radio Receiver

• Connect the 3.5 mm jack plug of the audio/video cable provided (= adapter cable 3.5
mm jack to 2 x cinch plug) to the "AV OUT" outlet (6).
• Connect the red cinch plug of the adapter cable with the display device's audio input.
• Connect the yellow cinch plug of the adapter cable with the display device's video
input.
• Screw the aerial onto the "Aerial Connection" (3) on the receiver.
• Connect the low voltage plug of the supplied plug-in mains power supply with the
"DC IN 5V" (5) power connection on your radio receiver.
• Insert the mains power unit into a suitable mains socket.
To avoid distortion or mismatching that could damage the appli-
ance, the audio connecting plug (white) may only be connected to
an audio cinch input.
27