Inhaltsverzeichnis
Werbung
Mounting and Connection
Attention: Only qualified personnel are allowed to work on
electrical systems in vehicles. For installing the LED work light
observe the regulations and safety instructions.
For mounting the LED work light on the vehicle, use the
included bolts, screws and nuts as well as the bracket or the
plates.
For fix mounting use the included bolts and nut or other bolts or
screw that are suitable for
the ground.
In road transport always
switch off the work light.
1. Connect the cable core
(marked with minus) of
the LED work light to
the minus pole or to the
chassis.
2. Finally
connect
cable
core
with plus) to the plus
pole.
Hint: When using a
switch make sure the
switch is equipped with
at least 1.5 A
Maintenance and Cleaning
Clean the LED work light frequently to maintain full
brightness. Do not clean the housing of the work light with
high pressure cleaners!
Do not clean the unit with aggressive detergents but rather
use a dry or lightly moistened cloth to clean the unit.
Safety Notes and Using
the
(marked
.
Plates for firm Mounting
Bracket for loose Mounting
4
Werbung
Inhaltsverzeichnis
