Inhaltsverzeichnis
Werbung
Please note the following safety notes to avoid
malfunctions, damage or physical injury:
It is not allowed to use the LED work light in vehicles in road
traffic. If the work light is used in road traffic the operating
licence will expire.
Only qualified personnel are allowed to work on electrical
systems in vehicles. For installing the LED work light observe
the regulations and safety instructions.
Do not modify the LED work light in any way.
Do not stare into the light beam. Do not use devices which
can strongly focus light for viewing the light beam.
If you have to drill holes into the vehicle structure for mounting
the LED work light, make sure not to damage the surface of the
vehicle (e. g. corrosion). Make sure not to damage cables or
supporting parts.
Tighten all screws after adjustment and frequently inspect the
unit to make sure that it is securely attached.
Do not expose the LED work light to oil, grease, dust/dirt,
extreme temperatures, strong vibrations and mechanical
stress.
Do not continue to use the work light if the unit becomes
damaged. Repair work must be done by a qualified service
technician.
Do not lead the power cord around sharp corners or over hot
surfaces. Use cable shoes on the wires.
To avoid danger of fire and personal injuries, operate the work
light only with the protective cover in place and replace a
broken cover immediately.
Safety Notes and Using
3
Werbung
Inhaltsverzeichnis
