Klarstein 10030708 Inbetriebnahme Und Bedienung Seite 13

5. Press the ''VAC time +'' button continually, till it reaches the pressure that you want. You can watch the vacu-
um bag to decide the pressure. During this process, you can stop vacuum by stop pressing this button ; and
press it again to vacuum again.
6. When the pressure reaches what it needs, press ''Start'' button to start sealing.
7. The indicator number of SEAL TIME counts down to 0 and the working process is done
How to Use the Vacuum Sealer with a Canister
NOTE : The canister is available as an option and is not included in the scope of delivery, as is the hose.
1. Wipe canister cover, canister base and ensure they are clean and dry.
2. Place food into canister and leave at least one inch of space between food and cover.
3. Place cover onto canister, insert one end of accessory hose into port on appliance. Put the other end onto
canister port ; pressing down firmly to ensure a tight fit.
4. Close lid and turn on the machine.
5. Choose "Canister" function and press "start" button.
6. The unit will continue to vacuum until air has been removed.
How To Marinate Foods
There is a special function in VS950—the marinate mode. In the marinate mode, the machine can run two
cycles of vacuuming and releasing air to the canister, allowing foods to get optimum pickle infusion in the least
amount of time. Vacuum canister is a perfect partner to marinating foods. The reason that foods can be mari-
nated in such a short time is that, it opens the micro-holes of the foods, allowing pickle infusion very quickly.
IMPORTANT: when using canister for marinating, there should be a knob on the canister lid. Make sure the
canister lid is in "Open" status but NOT "Vacuum" status when it is in the marinate process.
1. Put items in the canister. Make sure there is no powder or food debris on the canister lid gasket. Also please
allow some space after the items are put into the canister. And then close the lid.
2. Turn the knob on the caniter lid to "Open" position.
3. Connect the hose to the Accessory port on the machine and the port on the canister lid.
4. Close lid of machine and choose "Marinate" function.
5. Press "Start" button.
6. When the vacuum sealer reaches the vacuum pressure, the machine will stop vacuumizing automatically
and then release air into the canister, this working cycle repeats continually for 30 minutes and then stops
automatically.
7. The machine vacuums the canister again. The above mentioned cycle will be run two times.
8. Press "Off" button to stop the machine' s all working processes and turn off the sealer.
13