Changing The Fuse; Maintenance - Westfalia 57 39 23 Bedienungsanleitung

Initial Setup and Operation
At a low temperature the capacity of a lead acid battery may drop
considerably (at 0 °C by approx. 25 %).

Changing the Fuse

If none of the LEDs lights up, the fuse may be defective. To do
so, disconnect the battery protector from both the socket and the
consumer.
After that, follow the drawing.
Unscrew the cap and replace the blown fuse with a new one.
Make sure the fuse is replaced with one of the same type and
dimensions (8 A, f quick, 250 V, 6.3x32 mm).

Maintenance

Use a clean and dry cloth to clean the housing and the cables.
Disconnect the battery protector from the car's electric system
and the consumer.
10