Startup; Mechanical Installation - Conrad Raveland BRR 130 MK-II Bedienungsanleitung

Setup
To ensure the correct initial operation, please read these operating
instructions and the safety instructions carefully before using the
appliance!

Mechanical Installation

Modifications to the vehicle which are made necessary through the
installation of the amplifier or other components must always be
carried out in such a manner that neither the traffic safety nor the
designed stability of the car is impaired. For many cars, the operat-
ing license lapses already if you saw out a part of metal.
If you are in doubt when selecting a place for installation, consult
your car dealer.
Since the amplifier generates heat the place of installation must be
resistant against heat.
To ensure an adequate ventilation, there must be an open area of 5
cm around the housing. Apart from this, the air circulation may not
be obstructed by objects such as magazines, blankets, covers or
similar.
Before drilling the attachment holes make sure that the electric
cables, brake lines, the fuel tank or similar systems will not be dam-
aged.
If using tools to install your car hi-fi components, observe the man-
ufacturer's safety instructions.
When installing the car hi-fi system, consider the danger of accident
which can arise by devices broken away in the case of an accident.
Therefore, fasten each part reliably and at a place at which it cannot
become a risk for the passengers.
Select a suitable position for mounting the amplifier.
A suitable place for mounting has the following features:
• dry
• as free from dust as possible
• little vibration
• good circulation
• heat-resistant environment
28