Herunterladen Diese Seite drucken

Correcting Malfunctions; Technical Data; Introduction - Conrad SW-238 Bedienungsanleitung

Werbung

Disposal
Dispose of the unserviceable device according to the applicable legal regulations.

Correcting Malfunctions

If the green LED is flashing this indicates that the device has found a very large met-
al object or that it is not correctly self-balanced. Wait 5 seconds until the device is
self-balanced again or turn the sensitivity regulator slowly clockwise to the right
towards "L" low until the flashing stops.

Technical Data

Power supply:
6.0 VDC 4* AA / Mignon 1,5V Alkaline-
batteries
Operating voltage:
app. 4,7 to 6,5 VDC
Power consumption
app. 20 mA
Battery lifetime:
app. 50 hours continually
Depth of searching measured in air:
For a coin
app. 15 to 20 cm
For a metal piece 10* 10 cm
app. 35 to 40 cm
For a metal piece 50* 50 cm
app. 70 to 80 cm
Diameter of searching coil
25 cm
Weight without batteries
1105 g
18
Table of Contents
Introduction.............................................................................................................11
Prescribed Use .......................................................................................................12
Safety Instructions ..................................................................................................12
Scope of Delivery....................................................................................................14
Mounting .................................................................................................................14
Operational Control.................................................................................................15
Operation ................................................................................................................16
Battery Exchange....................................................................................................17
Disposal ..................................................................................................................18
Correcting Malfunctions..........................................................................................18
Technical Data ........................................................................................................18

Introduction

Dear customer,
we thank you for your acquiring this metal locator.
By acquiring this device you have purchased a product which has been designed
and manufactured according to the state of technical development today.
This product meets the requirements of the guideline 89/ 339/ EEC. Therefore, it sat-
isfies the standards of the established European and national guidelines. CE-confor-
mity has been proved; the relevant documents are in the manufacturer's possession.
We kindly request the user to respect this operating manual to preserve this condi-
tion and to ensure safe operation.
Page
11

Werbung

loading

Diese Anleitung auch für:

84 91 77