Functional Descriptions; General Configuration Commands; Setting Time And Date (Time, Date) - Conrad GKA100 Bedienungsanleitung

12. Functional Descriptions

In the following examples, it is assumed that the PIN of the SIM card in the device is „1513".

12.1 General Configuration Commands

This sub-chapter describes all general configuration commands.

12.1.1. Setting Time and Date (TIME, DATE)

The product offers time and date settings. When time and date are set, the day of the week is
calculated automatically. This way, the precise time and date at which the text message was
generated is stored in the text message, independently of when the text message was sent
or received. Various functions also require the current time and date.
SET TIME <hh mm> #1513
SET DATE <hh mm dd mm yy> #1513
The following values are possible:
Hour Minute
(00-23) (00-60)
Example 13:24 hours, 28.09.2011:
SET DATE 13 24 28 09 11 #1513

Single digit values always must be preceded by „0". Instead of „9", write „09".
Example of a text message response:
GKA100 1.xx
...................
Time: 13:24
Date: 28:09:11
Weekday: Monday
Status report time:
Idle.alarm/time:
Day Month
(01-31) (01-12)
= time
= time and date
Year
(00-95)
91