Siemens Simatic S5 PG 730 Systemhandbuch Seite 363

Systemhandbuch
mov dx,gsp_port_h
mov bx,gsp_port_l
mov ax,0
mov cx,1
stc
call write_to_gspmem
;--------------------------------------------------------------------------------------------------- - ------;
; Setup GSP-I/O-Register
;--------------------------------------------------------------------------------------------------- - ------;
mov dx,io_adr_h
mov bx,io_adr1_l
mov cx,12
mov si,offset ioregs1
stc
call move_to_gspmem
mov bx,io_adr2_l
mov cx,7
mov si,offset ioregs2
stc
call move_to_gspmem
mov bx,io_adr3_l
mov cx,1
mov si,offset ioregs3
stc
call move_to_gspmem
;--------------------------------------------------------------------------------------------------- - ------;
; Setup Hitachi HD153119 Colour-Lookup-Table
; Load 2 sets of 16 Colors into 16 palettes
;--------------------------------------------------------------------------------------------------- - ------;
mov dx,lut_wr_adr_h
mov bx,lut_adr_l
mov ax,0
mov cx,1
stc
call write_to_gspmem
mov di,8
mov dx,lut_data_h
next_pal_0:
C79000-B8500-C073-01
Farbgraphik PG 730
;point to gsp_port
;reset gsp_port
;1 word to write
;setup HADDR-Reg.
;point to GSP-I/O-Register
;length ioregs1
;setup HADDR-Reg.
;transfer 1st Bank
;length ioregs2
;setup HADDR-Reg.
;transfer 2nd Bank
;length ioregs3
;setup HADDR-Reg.
;transfer 3rd Bank
;point to lut-write-
;address-register
;select first colour entry
;setup HADDR-Reg.
;setup loop count
;point to lut-colour-
;-value-register
;
;
;
23 - 35