Westfalia 108196 Bedienungsanleitung Seite 5

Measuring:
1. Put the valve plug (1) on the tyre valve. To do this, please press down the
lever to unlock the clamping mechanism. As soon as you let go the lever, the
plug clamps at the valve.
2. Now, you can read the existing pressure from the pressure gauge.
On the outside margin of the scale, you will find the unit bar (1 bar = 100 kPa).
At the inner surface of the scale, you will find the information for psi.
Filling:
1. Connect the quick connector (2) of the tyre inflator with a compressed-air
line.
2. Put the valve plug on the tyre valve.
3. Pressing the lever (5), compressed air flows into the tyre.
Filling in the air, at that moment, the manometer shows a pressure a little bit
above the real tyre pressure. Just as you let go the lever, you see the actual tyre
pressure on the manometer.
Tip: Increasing the tyre pressure to max. 0.2 bars, you will have a positive effect
on fuel consumption.
Deflation of Air:
If the tyre pressure is too high, please press the deflation pushbutton (6) and
deflate slowly the compressed air over the control lever. Sink the air pressure to
the desired value.
Cleaning and Maintenance
Do not allow foreign substances and dirt to enter the compressed-air nozzle.
Do not expose the manometer to vibrations or mechanical pressure.
Technical Data
Pressure Range: from 0 to 12 bars
Diameter of Pressure Gauge (3): 6 cm
Tube Length (4): ca. 41 cm
Design protected by copyright © Westfalia 04/09