HP PS200W Schnellstartanleitung Seite 3

Setting up the scanner
HP Portable Desktop Scanner PS200W
1
Remove protective tape
from the scanner and inside
the feeder.
3
For USB connection, connect
the scanner to your computer
using the USB cable or for
Wi-Fi connection, press the
Wi-Fi button.
NOTE: For Wi-Fi mode, the scanner does
not have to stay connected to your
computer.
2
Connect the scanner to a
power outlet using the
AC adapter. Then, turn on
the scanner with the
power button.
4
Install the HP
WorkScan software at
hpworksolutions.com/setup
and follow the steps to start
using your scanner.
EN | 2