Herunterladen Diese Seite drucken

Philips LFH 9850 Benutzerhandbuch Seite 9

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4.4.3
Delete all recordings
Follow these steps to delete all recordings:
Press and hold the
1
two seconds. The
Press the
2
JOG DIAL
of the
symbol.
Press and hold the
3
two seconds to confirm the deletion or
press the
STOP/PLAY
deleting.
D Note
The voice prompt files that are used to give
authors feedback and guidance during telephone
recording will not be deleted by this operation.
4.5
Menu settings
The menu offers general and user-defined
setting options to make dictation and
transcription easier.
Press and hold the
1
seconds to open the menu.
Move the
2
JOG DIAL
the next/previous menu item.
Press the
3
JOG DIAL
Press the
DELETE
Move the
4
JOG DIAL
function.
Press the
5
JOG DIAL
check mark next to a menu entry indicates
that the setting is activated.
User manual
All manuals and user guides at all-guides.com
button
for
DELETE
12
symbol is displayed.
.
is displayed on top
ALL
button again for
DELETE
button to exit without
for two
JOG DIAL
left or right to select
to enter a sub-menu.
button to exit the menu.
left or right to select a
to confirm a selection. A
D Note
Some settings, such as defining author IDs
or switching to the simple display mode, are
available only through Philips SpeechExec Dictate.
See
Advanced configuration
information.
4.5.1
Menu list
Switch to insert recording mode to make
additions to a recording.
The recording format determines the audio
quality of recordings and affects the number of
audio files that can fit on the memory card.
Standard Play (SP) requires 1 megabyte for
10 minutes of recording.
Long Play mobile (LPm) requires 1 megabyte
for 15 minutes of recording.
Set the date and the time
Set the microphone sensitivity for the
environment and your recording preferences.
The microphone sensitivity is adjusted
automatically during telephone recording.
Display backlight
Display the remaining (–) or used-up (+)
recording time
One or more keywords, such as the author's
ID, can be assigned to every recording.
Keywords can be used to identify recordings
and automatic file routing in Philips SpeechExec
software.
Device beep
on page 11 for more
9

Werbung

loading