Panasonic CQ-RD545LEN Serviceanleitung Seite 10

RDS (Radio Data System) Reception coninxs
Changing Display
@ The display changes as follows when DISP is pressed.
(Frequency display continues for only 3 seconds, returning to PS dis-
play after that.) (while RDS station receiving)
PS display
4 {3 seconds)
Frequency display
+
CT display
5
Clock Time (CT) System
The CT (24-hour) system may not properly operate in areas where RDS
CT service is not available. Once CT service is received, the CT system
keeps operating. "NO CT" is displayed in areas where no CT service is
available.
© If CT display is kept on, it remains on even if PWR and ACC are
tumed off and back on again.
@ in CD changer mode, press DISP for more than 2 seconds to get
RDS CT-service.
B. TP Reception
Press TA to switch ON and keep it there when you wish to listen to traffic
information. Press TA to switch OFF when no traffic information is needed.
Select traffic information (TA on) mode
Volume Setting (Onty for TAPE/CD-C/AUX TA on mode: See page 10)
Adjust normal volume to a desired level suited to receiving traffic infor-
mation.
e Adjust the volume as desired using "VOL A" or "\V VOL" while re-
ceiving traffic information (TA).
© After traffic information (TA), the difference between normal volume
and TA volume is automatically stored in the memory (up to 4 levels)
so that next traffic information will be received at the preceding TA
volume which may be higher or lower than normal volume.
e Normal volume can be changed up to 4 levels upward or downward.
e If an adjusted level of volume is over 40 or 0 level, any further
change will not be made. ;
Press TA. TA off disappears and TA on lights.
When receiving the traffic Information broadcast station (TP station):
Wait for another station that broadcast traffic information.
<TA off> <TA on>
mmc -- pear er] nos] eon] Thay
gat RY Press TA. Bae FY
When receiving a station other than TP stations (Including the EON station)
A traffic information station is automatically searched for. And the radio
automatically stops on the next available TP station.
<TA off> <Search stops at TA on>
Press TA. at RY
TP Seek Tuning
Press "\/ TUNE" or "TUNE AA" for more than a half second, then re-
lease, The radio automatically stops on the next available TP station.
Press "\/ TUNE" or
mew va Ron for hong oS mM.
Wat FeLy 3 than a half second. Hae R i
Auto TP Station Preset
@ Press and hold BAND (AUTO PRESET) for more than 2 seconds when
TA is ON. The five strongest available TP stations are automatically
set in memory on the preset buttons 1 through 5. Once set, the preset
stations are sequentially scanned for 5 seconds.
© To recall memorized TP stations, press any of the preset buttons 1
through 5 you want to hear. Then Best Station Research function is
activated to automatically select the strongest available frequency for
the TP station through the built-in frequency lists.