Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
2 INSTALLATION
2.1 SAFETY SUMMARY
C A U T I O N
• Do not connect voltage input to the control system before ins-
tallation is correctly done.
• Read this manual carefully before performing installation
work.
• Read this manual in order to configure the CHL-MBS-01.
C A U T I O N
• Install CHL-MBS-01 away from possible sources of electro-
magnetic waves.
• Respect local electrical standards.
• Use a power circuit that is not subject to peak demands.
• Ensure that there is enough free space around the
CHL-MBS-01 (see figure) so that the heat may dissipate ade-
quately (refer to Installation Work).
• If you install the CHL-MBS-01 in vertical position, install the
power supply in the lower part and the temperature control
outputs in the upper part.
C A U T I O N
• This appliance must be used only by adult and capable people, having received the technical information or instructions to handle
properly and safely this appliance.
• Children should be supervised to ensure that they do not play with the appliance.
2.2 DIMENSIONAL DATA
8
PMML0301A rev.0 - 09/2013
C A U T I O N
Do not install CHL-MBS-01 in places...:
• with vapour, oil or dispersed liquids.
• with heat sources nearby (sulphuric surroundings).
• where accumulation, generation or leaks of inflammable ga-
ses has been detected.
• that are near the sea, in saline, acid or alkaline surroundings.
Werbung
