Hitachi CHL-MBS-01 Installations- Und Betriebshandbuch Seite 14

Installation
SW10 – MODBUS address
Address: 1 Address: 2
Address: 5 Address: 6
Address: 9 Address: 10
Address: 13 Address: 14
Address: 17 Address: 18
Address: 21 Address: 22
Address: 25 Address: 26
Address: 29 Address: 30
2.8 CHEKING PROCEDURE
Checking of CHL-MBS-01 consist in disconnect and connect the CHL-MBS-01 and check that in the 7-segments display appears the
current software value.
N O T E
Ask your Hitachi distributor what check value has the last version of firmware.
14
SW10
Address: 3
Address: 7
Address: 11
Address: 15
Address: 19
Address: 23
Address: 27
Address: 31
PMML0301A rev.0 - 09/2013
Address: 4 Configuration of MODBUS Address .
SW10 pins 1~5 must be set according the corre-
sponding drawing of the desired address.
Address: 8
SW10 pins 6~8 must be kept in OFF
Address: 12
Pins 1~5 OFF indicate that
Address 1 is set
Pins 1~5 ON indicate that
Address: 16
Address 32 is set
Address: 20
Some MODBUS devices may not recognize address
32. Therefore, before setting address 32 ensure that
all MODBUS devices can work with it.
Address: 24
Address: 28
Address: 32
Description
N O T E
N O T E