Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9—1l5
DATE RECORDING
When the date has been set, the camera/recorder
will enter the automatic date recofding mode
automatically.
1. Press the red button on the CAM/OFF/VIDEO
DATE SEARCH
el
The date search function memorizes the start and end positions of recordings you made on a specific
day so you can easily locate those positions later as long as the cassette is left in the camera/recorder.
NOTE: Be sure that the date and time are set.
switch as you slide it to CAM.
2. Press the DATE/TITLE button to specify the
date display you want to record.
AUTO and date -— Automatic date recording
This option records the date automatically
once a day at the beginning of recording for 10
seconds.
@AUTO
5/11/1998
Note: The camera/recorder records the same
date when:
— the cassette 1s replaced.
- you select © AUTO and date display again.
—the recording ts less than 10 seconds long.
Note: If the date changes while recording con-
tinues
over
10 seconds,
the new
date
is
recorded for about 10 seconds the next time
you make a recording.
© TITLE and date - Automatic title and date
recording
This option records the date and created title
(see "TITLE RECORDING"
on page 25) auto-
matically once
a day at the beginning
of
recording for 10 seconds.
HAPPY BIRTHDAY
@TITLE
5/11/1998
Note:
When
QOTITLE
is displayed
in the
viewfinder, the title cannot be turned on or off
using the remote control.
Date - Date recording
The camera/recorder records the date with the
picture all the time.
5/11/1998
No display — No date recording
The camera/recorder does not record the date.
Date and time — Date and time recording
The camera/recorder
records the date and
time with the picture all the time.
10:20
5/11/1998
. Press the start/stop button.
Recording will start.
Note:
When
GAUTO
and
date
display
selected, the date disappears about 10 sec-
onds after recoding !s started.
Note: When © TITLE and date is selected, the
title and date disappear about 10 seconds after
recording 1s started.
1. Attach a power source and slide the Operate
NOTES:
2.
switch to "VIDEO".
Press the DATE/TITLE
button (the DISPLAY
button
on the remote
control)
to display
"SEARCH" tn the viewfinder.
. Press the REW button to search for the start
position from which you last made a recording
or the F.F button (the F.FWD button on the
remote control) to recording end position.
. When
the required position is located, the
camera/recorder enters the stop mode and
"SEARCH" disappears from the viewfinder.
DISPLAY BUTTON
Heenan
ee eee
ee eee eee
aie
When the DISPLAY button on the remote control
is pressed, the displays in the viewfinder will
change as follows.
lf you set the operate switch to "VIDEO" and
press the DISPLAY button while a recorded
tape is in the camera/recorder, "SEARCH" will
\f you have ejected the cassette, this function
will not operate with that cassette.
(When a
cassette
is inserted
and
the
recording
is
started, the position 1s identified as the record-
ing start position on that day.)
If the clock battery 1s not inserted, the date
search function does not operate when the
battery
providing
the
power
to
the
camera/recorder is removed.
When the cassette was recorded by another
camera/recorder,
the
date search
function
does not operate.
The date search function ts released when you
press the STOP
button during date search
mode.
if the recorded time 1s less than 30 seconds,
the date search function may not operate nor-
mally.
AE: 400
0:00:00M
2 |
mode.
(See "DATE SEARCH" above.)
{cannot be mont-
(can be monitored
tored on the TV)
on the TV)
Werbung
