Werbung
Before first Use
Unpack the router and check all parts for any damage in transit. Dispose of
packaging materials or store it out of reach of children. Plastic bags etc. may
become a deadly toy for children.
Power Mains Connection
Make sure the mains voltage is the same as the operating voltage indicated on
the rating plate.
Switching ON/OFF
To operate the machine press the ON/OFF
switch (3) mounted in the right hand side
handle. To avoid having to press the switch
during prolonged operation, the machine is
equipped with a continuous operation button
(2).
Inserting the Milling Cutter
1. Pull the power plug before undertaking any
manipulations on the machine.
2. Make sure that the collet and the shank of
the milling cutter (10) are of the same size.
The machine is supplied with collets for 6,
8 and 12 mm tool shafts.
3. Press the spindle lock (8) and unscrew the
collet nut (10) and insert the milling cutter.
The milling cutter shank must be inserted
at least 20 mm into the collet.
4. Press the spindle-lock (8) and tighten the
collet nut tightly with the included fork
spanner. Never tighten the collet nut with
the fork spanner without first inserting a
milling cutter.
5. Run machine up to full no load speed
before using and watch out for vibration or
wobbling that could indicate unbalance.
Operation
17
8
10
Werbung
