Velleman CHLSC8 Gebrauchsanweisung Seite 7

3. General Guidelines
Refer to the Velleman Group NV® Service and Quality Warranty
on the last pages of this manual.
•
Familiarise yourself with the functions of the device before
actually using it.
•
All modifications of the device are forbidden.
•
Only use the device for its intended purpose. Using the device
in an unauthorised way will void the warranty.
4. Features and specifications
• suitable for: only for digital LED strips
• operating mode: turn on/off via 1 external switch or 2 switches
via connection for two-way switch
• note: only works with switches, not via push buttons
• configuration modes: brightness, change modes (20 different
modes), mode speed
5. Overview
Refer to the illustrations on page 2 of this manual.
1. LED strip connection cable
2. 2 white dotted cables. Connection to external switch or
switches
"+/speed" push button
3.
4. mode push button
"-/slow" push button
5.
6. White cable connected to LED strip. Connect to 0VDC
7. Red cable connected to LED strip. Connect to 12VDC
6. Operation
Only connect the controller to digital white LED strips which work
with the SPI digital signal on 12V and 24V. The controller is
developed to work with the WS2811 LED driver ICs.
Only use 1 power supply for the whole installation and connect
ground (GND) connections.
V. 01 – 15/09/2023
CHLSC8
7 ©Velleman Group nv