Hitachi CSNET MANAGER XT Installations- Und Betriebshandbuch Seite 55

Operation and configuration of packaged units
• TSet Limits
- Cool Range: Sets the maximum and the minimum temperature values in cool mode.
Heat Range: Sets the maximum and the minimum temperature values in heat mode.
-
?
N O T E
1 If the indoor unit is RPC or RPK, CSNET WEB will display RPC(RPK), as they cannot be identified properly.
2 The precise model should be entered to make necessary maintenance and repair work easier.
3 There following are possible types of outdoor units:
- RAS-#.# (UTO): Utopia and Utopia Big.
- RAS-#.# (INV): Utopia Inverter.
- RAS-#.# (SF): Set-Free and Mini Set-Free.
4 It is not possible for two or more units with a remote controller to function in different conditions. Only use the remote control Group within the
same cooling system or CH Box. Do not use a single controller to control indoor units connected to different outdoor units or CH boxes. RCS is
set automatically when HC-A64NET is doing auto configuration for the units that let detect this configuration. The assigned value is indicative and
it's always suggested to revise the assignation or do it manually.
5 The compatibility of the operation modes is as follows:
Operation mode
Cool
Heat
Dry
Fan
Automatic cooling / heating
6 This information will be used by CSNET Manager to calculate the control parameters of the cooling system, like TdSH.
49 PMML0303A rev.2 - 02/2015
Compatible modes in the other units of the same group
Cool, Dry, Fan
Heat, Fan
Cool, Dry, Fan
Cool, Dry, Heat, Fan
Automatic cooling / heating