Installation
2 INSTALLATION
!
C A U T I O N
•
Disregarding the safety and assembly instructions may result in the falling of and / or damage to your electrical appliance. Opening the package
represents your undertaking to closely read and follow the instructions. This mount is not intended for use in public places.
•
This mount is intended for use only with HITACHI CSNET Manager LT/XT.
•
Never install CSNET Manager in horizontal position neither cover the ventilation holes located in the bottom and top of device. It may damage the
device due to lack of ventilation.
?
N O T E
It is normal that the CSNET Manager LT/XT reaches high temperature.
2.1 HC-A64NET
Please refer to the Installation and operation manual of the HC-A64NET.
2.2 CSNET MANAGER
CSNET Manager has standard VESA mounting dimensions commonly available in the market. However, Hitachi offers these 2
accessories for the CSNET Manager (LT/XT) assembly:
Stand mounted support
?
N O T E
The item may differ from the image shown.
2.2.1 Wall Mounted (Optional)
!
C A U T I O N
•
This device cannot built in neither installed without providing ventilation to the aluminium sink behind.
•
Place the support on a resistant wall.
CSNET Manager can be wall mounted by using any standard VESA 75 mm wall mounted support for LT & XT and VESA 100 mm for
XT only. HITACHI offers the following wall mounted accessory, model code 7E512300.
18
PMML0303A rev.2 - 02/2015
Wall mounted support