Bosch 8 OptiMUM-Serie Gebrauchsanleitung Seite 49

Using instantaneous switching
Set the rotary switch to
1.
and hold.
→ Fig. 19
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
→ Fig. 20
a The rotary switch springs to
a Processing stops.
Tip
Instantaneous switching is especially
suitable when using the following
accessories:
¡ Glass blender attachment
¡ Multi-chopper set
¡ Multi-blender attachment
7.12 Drive cover
Remove the protective cover to use
accessories on drive 2 or 3.
Removing drive cover
▶ Lift the protective cover of drive 2
or 3 by the side lug lift and re-
move.
→ Fig.
21
Fitting drive cover
▶ Position the protective cover of
drive 2 or 3 and press down firmly.
→ Fig.
22
8 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
1
Depending on the appliance specifications
8.1 Overview of basic set-
1 1
or
You can find an overview of the basic
settings here.
Setting
LANGUAGE
⁠ .
TONE
BRIGHTNESS
UNITS
1
8.2 Changing basic settings
Requirement: The mains plug is in-
serted.
1.
2.
a The display shows the configura-
3.
4.
a The display shows "SAVING:
5.
a The display shows "SETUP"
6.
tings
1
Depending on the appliance spe-
cifications
If the display is switched off, press
any button.
Press and hold
eously.
tion menu.
Use to select the required set-
ting.
Use or to change the selec-
ted setting.
O & +".
To save the changed setting, press
and hold and
"SAVED".
To change and save other set-
tings, repeat steps 3-5.
Basic settings en
Description
Select the dis-
play language.
Switch signal
tones off or ad-
just the volume.
Set the display
brightness.
Set the display
units for the
scales.
and simultan-
simultaneously.
49