Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting up and connecting
Set-up location requirements
For safe and trouble-free operation of the device , the set-up location must fulfil
the following requirements:
■
When setting it up, place the appliance on a firm, flat and horizontal
surface.
■
Do not place the device in a hot, wet or extremely damp environment or in
the vicinity of flammable materials.
■
The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Electrical connection
CAUTION
►
Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
These data must agree so that no damage is sustained by the device.
►
Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
►
Ensure that the power cable is not taut or kinked.
►
Do not let the power cable hang over edges (trip wire effect).
♦
Insert the plug into the mains mains power socket.
SFS 110 B1
GB
23
Werbung
