Inhaltsverzeichnis
Werbung
Assembling and Operating
1. Turn the motor unit (3) upside down and mount the desired mash (6, 7 or 8)
on the motor unit by using the wing screws.
Simultaneously screw the wing screws on the unit
and make sure the wing screws are tightly fastened.
By doing this the contact safety switches will be fully
pressed down.
2. Now turn around the motor unit and place the motor
unit on the collecting bin (5).
3. Lock both parts together with the quick locks (4).
4. Place the filling bin (1) on the motor unit. Lock the
filling bin with the included mounting material
(washer, retainer ring, wing nut).
5. Fill the grist into the filling bin and cover the filling bin
with the dust cover, in order to avoid spilling during
operation.
6. Insert the power plug into a wall socket and press the
ON/OFF switch (2) to switch on the feed mill. During
operation wear hearing protection.
If the motor does not function, please check if the wing
screws are tightly screwed on the unit, so the contact safety switches are
activated.
7. After finishing work switch off the motor unit and
remove the milled animal food.
Consider the slow-down time of the motor unit
after switching off.
13
Werbung
Inhaltsverzeichnis
