Setting-up the Feed Mill
Select a suitable and dry work place for operating the feed mill. Only operate
the feed mill on a hard and level ground.
Make sure the feed mill is positioned at a sufficient distance from walls and
other objects during operation.
Keep the feed mill dry at any time. The ambient working temperature should
be from 0 – 40° C.
Carefully unpack the feed mill and keep packaging materials out of range of
children. There is danger of suffocation!
Hints
Only use pure grist for milling without dirt and stones. Otherwise the grinder
might be damaged.
Do not operate the feed mill when empty.
Only mill dry grist.
Do not mill already milled animal food a second time.
Safety Switches
Attention! The motor unit is equipped with two contact
safety switches.
If the contact safety switches are not fully pressed down,
the motor will not start up. The safety switches are fully
pressed down when the wing screws of the sieve are
tightly screwed on the unit.
Make sure the contact safety switches are not blocked by
dust and dirt. If necessary clean the safety switched
before use.
OPERATION
12