Avoiding Kickback And Pushback - Westfalia 92 11 80 Originalanleitung

Avoiding Kickback and Pushback

The most common reactive forces are:
kickback, pull-in and pushback.
Kickback
Kickback may cause deadly injuries.
If kickback occurs, the chain saw will
be rapidly kicked back in direction to
the operator.
Kickback may occur:
▪ when the tip of the guide bar
touches a hard object,
▪ when the saw chain on the guide
bar tip is jammed while cutting.
To avoid the risk of kickback,
▪ make sure no body parts are in the
extended swing range of the saw
chain,
▪ firmly hold the gasoline chain saw
with both hands when working.
Use a firm grip with thumb and
fingers encircling the chain saw
handles,
▪ always keep safe stand in order to
be able to withstand the backward
motion,
▪ never cut over shoulder height,
▪ always cut with full speed,
▪ do not start cutting with the tip of
the guide bar or inserting the tip of
the guide bar into the wood first.
Safety Notes
6