Introduction; Device Description (Fig. 1); Scope Of Delivery; Proper Use - Scheppach BCHS300-ProS Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manual
before installing and commissioning the device.
This operating manual should help you familiarise your-
self with your power tool and teach you how to use it
for its intended purpose. The operating manual include
important instructions for the safe, proper and econom-
ic operation of the power tool, for avoiding danger, for
minimising repair costs and downtimes and for increas-
ing the reliability and extending the service life of the
power tool. In addition to the safety instructions in this
operating manual, you must also observe the regu-
lations applicable to the operation of the power tool in
your country. Keep the operating manual package with
the power tool at all times and store it in a plastic cover
to protect it from dirt and moisture. They must be read
and carefully observed by all operating personnel be-
fore starting the work. The power tool may only be used
by personnel who have been trained to use it and who
have been instructed with respect to the associated
hazards. The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
30 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description (Fig. 1)

1. Rear handle
2. On/off switch
3. Switch lock
4. Battery slot
5. protective cover
6. Saw chain
7. Guide rail
8. Claw stop
9. Hand guard/chain brake
10. Bow-type handle
11. Chain tensioning wheel
12. Chain cover
13. -
14. Oil tank plug
15. Oil tank with level indicator
16. Housing
17. Main switch
18. Battery
19. Battery charger
20. Rechargeable battery charge status indicator

3. Scope of delivery

• Operating manual
• Rechargeable battery *
• Charging unit *
• Chainsaw
(*may not be included in the scope of delivery)

4. Proper use

The chain saw may only be used for sawing wood out-
doors up to a diameter corresponding to the cutting bar
length used. The chainsaw must not be used for any
other purpose. Do not make any modifications to the
chainsaw. Safety may be compromised as a result. The
user/operator, not the manufacturer, is responsible for
damages or injuries of any type resulting from this.
Please note that this device was not designed for com-
mercial use. Avoid using the chainsaw when the ambient
temperature is less than 10°C. First-time users must be
instructed in order to familiarise themselves with the char-
acteristics of the device. Attend a state chainsaw training
course for your safety.
www.scheppach.com