Warnings For Temperature Settings - Sharp SJ-L2350E3I-EU Bedienungsanleitung

CHAPTER -3: USING YOUR FRIDGE
Economy mode
How would it be used?
• Push "mode button" till a circle appears around economy symbol.
• If no pressed any button for 1 sec. Mode will be set. Circle will blink 3 times.
When mode is set, buzzer will sound beep beep.
• Temperature segment will show "E".
• Circle of economy symbol and E will light till mode finishes.
During this mode:
• Temperature may be adjusted.When economy mode will be cancelled, the
selected setting values will proceed.
• Super Cool mode can be selected after cancelling the economy mode. Then
the selected mode is activated.
• To cancel, you will just need to press on mode button.
Screen saver mode
How to use?
• This mode will be activated when you press on mode button for 5 seconds.
• If pressed on no button in 5 seconds when he mode is active, lights of the
control panel will go off.
• If you press any button when lights of control panel are off, the current
settings will appear on the screen, and then you can maket he adjustment
as you want.
• If you neither cancel screen saver mode nor press on any button in 5
seconds, the control panel will go off again.
• To cancel screen saver mode press on mode button for 5 seconds again.
• When screen saver mode is active you can also activate child lock.
• If you do not press any button for 5 seconds after activating child lock, the
lights of the control panel will go off. Then, you can view the previous settings
and that child lock symbol is active when you pres any button, and you can
cancel child lock as is described in the instruction of that mode.
Function of Child lock
When would it be used?
To prevent children from playing with the buttons and changing the settings you
have made, child lock is available in the appliance.
Activating Child Lock
Press on Cooler button simultaneously for 5 seconds.
Deactivating Child Lock
Press on Cooler button simultaneously for 5 seconds.
Note: Child lock will also be deactivated if electricity is interrupted or the fridge is
unplugged.

Warnings for temperature settings

• The ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the
temperature in the refrigerator compartment. If required,change the temperature setting.
• It is not recommended that you operate your fridge in environments colder than 10°C .
• The temperature setting should be set by taking into consideration how often the fridge door is opened and
closed, how much food is stored in the fridge and the environment in which and the positioning of the appliance.
• We recommend that when first using the fridge it should be left running for 24 hours uninterrupted to ensure it
is completely cooled. Do not open the fridge door, or put food inside for this period.
• Your fridge has a 5 minute built in delay function,
designed to prevent damage to the compressor. When
power is applied to your fridge, it will begin to operate
normally after 5 minutes.
• Your fridge is designed to operate in the ambient
temperature intervals stated in the standards, according
to the climate class stated in the information label. It is
not recommended that your fridge is operated in the
environments which are out of the stated temperature
intervals in terms of cooling efficiency.
Climate Class
T
ST
N
SN
EN -7-
c
c
Ambient Temperature
Between 16 and 43 (°C)
Between 16 and 38 (°C)
Between 16 and 32 (°C)
Between 10 and 32 (°C)
C
o