Explanation Of Displays And Buttons - Becker Centronic SunWindControl SWC241-II Montage- Und Betriebsanleitung

• The operator is not protected from interference from other telecommu-
nications systems and terminal equipment (e.g. even from radio-con-
trolled systems which are properly operated in the same frequency
range).
• Only connect radio receivers to devices and systems approved by the
manufacturer.
•
Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
•
Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
•
Note that the range of the radio signal is limited by legis-
lation as well as by design.

Explanation of displays and buttons

9
8
1. Setting tool
2. Wind threshold regulator
3. RETRACT button
4. STOP button
5. EXTEND button
7
6. Channel indicator lamp
7. Programming button
8. Labelling field
9. Type plate
3
4
5
6
17 - en
1
2