Promise Technology SmartStor NS2300N Kurzanleitung Seite 14

All manuals and user guides at all-guides.com
SmartStor NS4300N Quick Start Guide
2. In the Tree, on the left side of the PASM screen, click on the + beside the File
& Print
3. Click on the Protocol Control
4. Next to Service, click the Enable option, then click the OK button.
The UNIX/Linux protocol enables UNIX and Linux PCs to connect to
SmartStor.
5. Click on the File Sharing
6. Click on the Modify tab.
7. Check the Unix/Linux box, then click the OK button.
The UNIX/Linux file sharing enables UNIX and Linux PCs to access folders
on the SmartStor. In this case, access is given for the PUBLIC folder.
8. Click on the Sharing Setup
9. Click on the UNIX/Linux Sharing tab.
10. In the New IP Address field, type the IP address of the UNIX/Linux PC from
which you want to access the SmartStor.
11. Click the Add button.
On the UNIX or Linux PC with Command Line Interface
1. Open a terminal window.
2. Create a new folder for the SmartStor. Type mkdir SmartStor and press
Enter.
3. Mount the SmartStor. Type mount 192.168.1.194:/Volume1/Public /
SmartStor and press Enter.
Note that the IP address shown here is only an example. The IP address you
type in your terminal window will be different.
See "Finding the SmartStor's IP Address" on page 10.
Volume1 and Public refer to the default RAID Volume and folder created
during setup. See page 9.
4. Change to the SmartStor directory. Type cd /SmartStor and press Enter.
You can now copy files to and from the folder on the SmartStor.
5. When you are done with the SmartStor, type cd; umount /SmartStor and
press Enter.
icon to expand the Tree.
icon in the tree.
icon, then click on the UNIX/Linux tab.
icon in the tree.
14