Troubleshooting - Merax ES301428SAA Benutzerhandbuch

9. Troubleshooting

1. When the refrigerator does not work
Check if there is a power failure.
Check if the power plug is plugged into the power outlet.
Check that the fuse has not blown.
2. When the refrigerator is cooling excessively
The temperature control dial may be set too high.
If you place foodstuffs containing a lot of moisture directly under the cool air outlets, they will freeze
easily - This does not indicate a malfunction.
3. When the refrigerator is not cooling sufficiently
The door may not have been closed properly.
The door gaskets may be damaged.
The temperature control dial may not be set properly.
To allow proper ventilation make sure there is enough space between the refrigerator and the
surface around the refrigerator as well as between the top of the refrigerator and the roof.
4. When the defrosting water overflows inside the refrigerator and onto the floor
Check that the drain pipe and the drain hose are not dogged.
Check that the drain pan is housed properly.
5. When condensation form on the outside of the refrigerator
Condensation may form on the outside when the humidity is high such as during a wet season. This
is the same result as the condensation formed when chilled water is poured into a glass. It does not,
therefore, indicate a failure, wipe it dry with a dry cloth.
6. When you hear a sound like water flowing
A sound like water flowing is the refrigerant flowing- It does not Indicate a malfunction.
29