If any Flash Custom Functions and flash settings other than flash exposure
•
compensation have been set by both the camera and the flash, the latest settings
will take effect.
Protection Function
Over-Temperature Protection
To avoid overheating and deteriorating the flash head, do not fire more than 30
•
continuous flashes in fast succession 1/1 full power. After 30 continuous flashes,
allow a rest time of at least 10 minutes.
If you fire more than 30 continuous flashes and the fire more flashes in short
•
intervals, the inner over-temperature protection function may be activated. If this
occurs, allow a rest time of about 10 minutes, and the flash unit will then return
to normal.
When the over-temperature protection is started
•
Number of flashes that will activate over-temperature protection:
Power Output Level / Number of Flashes / Zoom (mm)
is shown on the LCD display.
33