Residual Risks; Package Contents; Electrical Safety - DeWalt DW443 Originalanweisungen

EN GLI SH
ENVIRONMENTAL SAFETY
1. Paint should be removed in such a
manner as to minimize the amount of dust
generated.
2. Areas where paint removal is occurring
should be sealed with plastic sheeting of
4 mils thickness.
3. Sanding should be done in a manner to
reduce tracking of paint dust outside the
work area.
CLEANING AND DISPOSAL
1. All surfaces in the work area should be
vacuumed and thoroughly cleaned daily for
the duration of the sanding project. Vacuum
filter bags should be changed frequently.
2. Plastic drop cloths should be gathered up
and disposed of along with any dust chips
or other removal debris. They should be
placed in sealed refuse receptacles and
disposed of through regular trash pick-up
procedures. During clean up, children and
pregnant women should be kept away from
the immediate work area.
3. All toys, washable furniture and utensils used
by children should be washed thoroughly
before being used again.

Residual Risks

In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing .
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION (FIG. 1)
The Date Code (l), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
24

Package Contents

The package contains:
1 Right angle random orbit sander
1 Dustbag
1 Vacuum extractor adaptor
1 Side handle
1 Sheet of sanding paper
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Electronic speed control dial
c. Dustbag
d. Vacuum extractor adaptor (option)
e. Dustbag adaptor
f. Side handle
g. Dust extractor spout
h. Hook and loop sanding pad
i. Dust channel
j. Main handle
INTENDED USE
Your D WALT DW443 right angle random orbit
E
sander has been designed for proffesional sanding
of wood and plastics.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
The right angle random orbit sander is a professional
power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.