Settings
Settings
8.
TAB
9.
Auto dose
10.
Super rinse
11.
Interior light at
power off
12.
Odour control
13.
Failure readout
14.
Factory reset
15.
Exit
30
Alternatives
On/Off
0 ml - 40 ml
On/Off
On/Off
On/Off
Activate this setting when using an all-in-one
detergent that contains rinse aid.
This setting reduces the rinse aid dosage
and affects how often the dishwasher's
built-in softener is regenerated.
Activate this setting if you want to use
automatic dosing of detergent.
The exact dosage depends on which
program is running. For the Auto program,
the dosage also depends on how dirty the
dishes are.
0 ml (Off)
The Super rinse function rinses the dishes an
extra two times.
The program time is extended and the
dishwasher uses more energy and water.
Activated in the following programs:
Intensive
Quick pro
Hygiene
Select whether the interior light is to be
switched on when the dishwasher is turned
off and the door is opened. (If
on, the interior light is always switched on
when the door is opened.)
When Odour control is activated,
Anti-odour can be selected from the program
table.
Any error messages.
When contacting your service centre, you
may be asked to provide the most recent
error messages.
Restores all settings to the factory defaults.
Select Factory reset and press
To exit the dishwasher's Settings menu,
select Exit and press
is turned
.
.