Enjoying Music Via Bluetooth; Pairing A Bluetooth Device With This Player - Yamaha BD-A1040 Bedienungsanleitung

You can enjoy music played on a Bluetooth device (smartphone, etc.) on this Player.
USB
5V 0.5A
Bluetooth device
(smartphone, etc.)
Hints
– "Pairing" is necessary for each Bluetooth device you
use.
– Use a Bluetooth device within 10 meters (33 ft) of
this Player.
– See also the owner's manual of your Bluetooth
device.
Bluetooth
– Bluetooth is a technology for wireless communication between
devices within an area of about 10 meters (33 ft) employing the
2.4 GHz frequency band, a band which can be used without a
license.
Handling Bluetooth communications
– The 2.4 GHz band used by Bluetooth compatible devices is a
radio band shared by many types of equipment. While
Bluetooth compatible devices use a technology minimizing the
influence of other components using the same radio band, such
influence may reduce the speed or distance of communications
and in some cases interrupt communications.
– The speed of signal transfer and the distance at which
communications is possible differs according to the distance
between the communicating devices, the presence of obstacles,
radio wave conditions and type of equipment.
– Yamaha does not guarantee all wireless connections between
this unit and devices compatible with Bluetooth function.
24
En

Enjoying music via Bluetooth

This Player
PURE DIRECT
SA-CD
®
AV receiver
■ Pairing a Bluetooth device with
this Player
When establishing a connecting between a Bluetooth
device and this Player for the first time, follow the
procedure below to perform "pairing".
Notes
– Up to eight Bluetooth devices can be pairing with
this Player. If the ninth device is paired, the oldest
pairing information is deleted.
– If any Bluetooth device is already connected to this
Player, terminate the Bluetooth connection before
performing pairing with a new device.
– When using Bluetooth, you cannot operate the disc
tray or playback of other sources.
1 If playback of other source is ongoing, stop the
playback.
2 Press Bluetooth to select Bluetooth as the input
source.
3 Press RED to switch this Player to the pairing mode.
4 Turn on your Bluetooth device to be paired, then
perform the pairing operation.
For details on pairing operation, refer to the owner's
manual of your Bluetooth device.
5 In the device list on your Bluetooth device, select "BD-
A1040 Yamaha".
If pass key (PIN) is required, enter the number "0000".
BD-A1040 Yamaha
When pairing is completed successfully, "SUCCESS"
appears on the front panel display ("Pairing Success"
appears on the TV screen).
If pairing failed, "FAILED" appears on the front panel
display ("Pairing Failed" appears on the TV screen).
PIN 0 0 0 0
1 2 3
4 5 6
7 8 9
0