Operation; Heating Food - Amica AMMF20E1W Bedienungsanleitung

OPERATION

This microwave oven has a modern electronic programmer to
adjust the parameters of cooking or reheating.
1. Setting current time
Once the microwave oven is plugged into the outlet, the display shows
00:00. Proceed as follows:
1. Press minute digits start to flash
2. Turn to set the hour
3. Press inute digits start to flash
4. Turn to set the minutes
5. Press to store current time setting
Current time must be set so that all oven functions are available.
Current time must be stored. If this is not done within 5 minutes,
previous time setting will be restored.

2. Heating food

Example: If you want to cook food for 20 minutes using 80% of maxi-
mum microwave power, the oven can be set as follows:
1. Press , the screen displays „PI 00".
2. Press repeatedly or turn
80%, the display will show „P80" (the microwave power is marked
with the appropriate symbol shown in the table on the next page).
3. Press
4. Turn to select the cook time of 20 minutes
5. Press
Note: Time can be adjusted with different resolution for individual cook
time ranges:
0---1 min:
1---5 min:
5---10 min: 30 seconds
10---30 min: 1 minute
30---95 min: 5 minutes
Symbols corresponding to the cooking power:
Microwave power
Symbol shown on the display
In waiting state, press
30 seconds. Each press on the same key can increase 30 seconds. The
maximum cooking time is 95 minutes.
In waiting states, turn
choosing, the time, press
power is 100%.
Under the states of auto menu and weight defrost, cooking time cannot
be increased.
to confirm.
to start heating or to cancel settings
5 seconds
10 seconds
100%
P100
key to cook with 100% power level for
left to choose the cooking time directly. After
, to set microwave power equal to
80% 50%
P80 P50
to start cooking. The microwave
- 39 -
30% 10%
P30 P10