Inhaltsverzeichnis; Before Use; Technical Data; Savings In Energy Consumption In The Use - Vestfrost FZ366W Bedienungsanleitung

GB
Contents
Warning ......................................................2
Before use ..................................................4
Technical data .............................................4
Savings in energy consumption
in the use ....................................................4
Get to know your wine cooler .....................5
Installation and start-up ..............................6
Reversible door ..........................................9
Operation and function .............................10
Defrosting, cleaning and maintenance .....12
Fault finding ..............................................13
Warranty, spare parts and service ............14
Disposal ....................................................15
CE Declaration of conformity.............page A

Before use

On receipt, check to ensure that the ap-
pliance has not been damaged during
transport. Transport damage should be
reported to the local distributor before the
wine cooler is put to use.
Remove the packaging. Clean the inside of
the cabinet using warm water with a mild
detergent. Rinse with clean water and dry
thoroughly (see cleaning instructions). Use
a soft cloth.
If during transport the appliance has been
laid down, or if it has been stored in cold
surroundings (colder than +5°C), it must be
allowed to stabilise in an upright position for
at least an hour before being switched on.

Technical data

Wiring and connections in power supply
systems must been all applicable (local and
national) electrical codes. Consult these
codes lengths and sizes prior to cabinet
installation.
This device complies with relevant EU
directives including Low Voltage Directive
2014/35/EU and Electromagnetic Compat-
ibility Directive 2014/30/EU
The socket should be freely accessible.
Connect the appliance only to 220/240 V
/ 50Hz alternating current via a correctly
installed earthed socket.
The socket must be fused with a 10-13 A
fuse.
If the appliance is to be operated in a non-
European country, check on the rating plate
whether the indicated voltage and current
type correspond to the values of your mains
supply.
Information regarding voltage, current or
power are given on the rating plate
The power cord may be replaced by a
technician only.
The rating plate provides various techni-
cal information as well as type and serial
number.
Savings in energy con-
sumption in the use
The energy consumption reduces.
1)..the lower the ambient temperature is.
2)..the warmer thermostat set point is.
3)..the lower the number and the shorter the
length of the door openings is.
4