mundoclima MUPO-07-C12 Benutzer- Oder Installationshandbuch Seite 48

3. Carefully lower the window. Secure the vent panel in place with 4 type B screws.plus one
screw for each extension.
4. Cut the foam seal B(non-adhesive) to the window width. Stuff the foam seal B between
the glass and the window to prevent air and insects from getting into room.
5. lnstall the security bracket with a type B screw, as shown.
Install the exhaust duct into the window
Remove the unit with the packed exhaust duct next to
the window, and then connect the adaptorB (flat mouth)
of the exhaust duct with the window. (Fig. E)
Screw B
Foam
Seal
48
Installation
Fig. E