BonsenKitchen MF8004 Bedienungsanleitung Seite 18

Inhaltsverzeichnis

Verfügbare Sprachen

Connect the plug into a power outlet.

Press the FUNCTION button three times, the working indicator of "Only warming

separately, without frothing" will light up. Then press the ON/OFF button once,the

appliance will start to work. Once the temperature of milk has achieved the setting

value, appliance will stop working;

When the appliance has stopped operating, open the lid, pour out the warm milk and

enjoy it.

Caution: Minimum 3 minutes rest time must be maintained between two continuous

cycles, otherwise, the appliance will enter self-protection state automatically after

working for 5 cycles continuously, the working indicator will flash and the switch button

will not be activated, after about 5 minutes, the appliance will enter standby state and

you can continue operating the appliance.

NOTE: Please clean the jar according to the section "CLEANING AND MAINTENANCE"

between two continuous cycles.

Always turn off the milk frother and disconnect the power supply when not use.

IV. Only frothing separately, without warming

Place the appliance on a flat surface.

Then open the lid, insert the frothing paddle onto the shaft on the bottom of jar.

Fill the jar with the desired amount of milk, and replace the lid.

NOTE: The max milk quantity permitted to add is 5oz(see Fig. 1), to avoid milk overflow-

ing after frothing.The min milk quantity permitted to add is 2.5oz.

NOTE: Please use whole milk.

Connect the plug into a power outlet.

Press the FUNCTION button four times, the working indicator of "Only frothing separate-

ly, without warming"will light up. Then press the ON/OFF button once,the frothing

paddle will rotate for frothing milk separately, but the heating element will not heat. And

the appliance will automatically stop rotating after operating.

NOTE: During operation, you can stop operating by pressing the froth button once.