ecofort ecodry Pro 35C Bedienungsanleitung Seite 60

Plug Into the Power
When the unit is plugged into power, it will start the self-diagnosis procedure. The display will
read as shown below. As soon as the unit is ready to start, the display will read STANDBY as
shown below. When this process is finished, functions can be accessed.
Switch Dehumidification on/off
Press ON/OFF button to switch on the dehumidification, the unit will start working, the display
shows UNIT ON, working time 00:00, set value (00%), current temperature 00 °C and current
humidity 00%. If the unit has been used earlier, the job hours will be reset.
When the display reads PLEASE WAIT COMP. DELAY and performs a numeral count down from a
maximum of 180 seconds to 0, this is the compressor delay protection. Once the unit completes
the compressor delay protection, the unit will start working immediately.
60