General; Information About This Instructions Manual; Information About This Manifold - Linde D300 Gebrauchsanleitung

ENGLISH
INSTRUCTION FOR USE: MANIFOLD
EN

1. GENERAL

1.1. INFORMATION ABOUT THIS INSTRUCTIONS MANUAL

This instruction is only intended for use with manifold product type:
•
D300
Manifolds of this type are suitable to take gas out of gas cylinder or bundle and reduce the pressure. These
manifolds were installed as permanently wall assembly and are connected to gas cylinder or bundle with
coil or hose.
These instructions enable you to operate the system safely and effi ciently. These instructions form an inte-
gral part of the system and must always be kept with the system and within easy reach of staff at all times.
Prior to commencing any work, the staff must read these instructions carefully and understand the contents.
Observance of all the safety information and instructions for operation that are contained in these instruc-
tions is essential to ensure work safety.
Local accident prevention regulations and general safety regulations governing the use of the system must
also be observed.
Illustrations in these instructions serve to ensure a basic understanding of the system and may diff er from
the actual version.

1.2. INFORMATION ABOUT THIS MANIFOLD

Manifolds of this type are only suitable for gases defi ned as standard gas. The maximum working pressure
for these manifolds is 300 bar.
Single stage manifolds consists of valves and a pressure regulator with metal diaphragm, created and
approved as ISO7291/ISO10297 including oxygen shock test.
Product line
High Pressure Regulator
with FKM
High Pressure Regulator with
EPDM Relief Valve Seat
This table is not exhaustive. For questions and ambiguities please contact manufacturer.
Relief Valve Seat
(Purity 6.0 | Brass chrome plated)
• Suitable Gases
(including their mixtures)
• High Purity
• Inert
• Flammable
• Oxidizing
• Use for O2
• Not Suitable Gases
(including their mixtures)
• Corrosive
• Toxic
• Not for CO2, N2O
• Suitable Gases
(including their mixtures)
• High Purity
� Inert
• Flammable
• Oxidizing
• Use for CO2, N2O
• Not Suitable Gases
(including their mixtures)
• Corrosive
• Toxic
• Not for O2
(share greater than 21%)
• Hydrocarbons
4/344
(Purity 6.0 | stainless steel)
• Suitable Gases
(including their mixtures)
• High Purity
� Inert
• Flammable
• Oxidizing (up to 200 bar)
• Corrosive (in doubt ask)
• Toxic (in doubt ask)
• Not Suitable Gases
(including their mixtures)
• Not for O2 (above 200 bar)
• Not for CO2, N2O
• Not for NH3, SO2, H2S
• Suitable Gases
(including their mixtures)
• High Purity
• Inert
• Flammable
• Oxidizing
• Corrosive (in doubt ask)
• Toxic (in doubt ask)
• Use for CO2, N2O
• Use for NH3, SO2, H2S
• Not Suitable Gases
(including their mixtures)
• Not for O2
(share greater than 21%)
• Hydrocarbons